"Wardrobe lighting" isn't one product — it's whichever of these problems your project actually has. Want a crisp, defined light line along a shelf edge? Want a soft wash of light rather than a visible source? Need an easy way to power whatever you choose? Want the light to just come on when the door opens, with nothing to wire or switch? Nucleo's four wardrobe lighting building blocks each answer one of those questions on their own — the NLF-0410 slim neon flex, the NLP-1512 flexible aluminium profile, the 12-port cabinet & wardrobe power supply, and the LED wardrobe light with built-in IR sensor and touch control. Pick one. Pick all four. They all run on the same 12–24V system either way.
Each one solves a specific wardrobe lighting problem. Match the "best for" line to what your project needs.
Best For · A Clean Line
✨
NLF-0410 Slim Neon Flex
A crisp, unbroken 4mm light line
A self-contained 4×10mm neon flex with 120 LEDs/m, cut at every single LED — sits flush in narrow grooves and reads as one continuous, defined line rather than a diffuse glow.
4×10mm
24V · 120 LED/m
8.3mm Cut Pitch
Best For · Indirect Glow
🛤️
NLP-1512 Flexible Profile
Soft, indirect wardrobe lighting
An aluminium channel with a push-fit silicone diffuser that softens the strip inside it into an indirect wash rather than a visible line — bends around curved shelf edges and corners, sits flush on straight runs too.
S-Bend Capable
Silicone Diffuser
Aluminium Heat Sink
Best For · Easy Connection
🔌
Cabinet & Wardrobe Power Supply
One driver, 12 independent ports
An 18mm-slim, SELV-rated driver with 12 independent ports — whatever combination of fixtures a project uses, each one wires to its own port on a single, easy-to-connect unit instead of a separate transformer per light.
12–24V DC
12 Ports
60/100/150W
Best For · Auto On/Off
👋
LED Wardrobe Light — IR Sensor + Touch
Easy, surface-mounted, switches itself on
A surface-mount LED bar with an inbuilt IR sensor and touch control — no separate sensor or switch to wire in. It turns on automatically as the door opens and off again after a delay, or can be operated by touch. Up to 10 units link side by side along a run.
12V DC · 3–10W
Inbuilt IR + Touch
Links Up to 10pcs
A quick match between what the wardrobe needs to do and which of the four fits.
🎨 Match the Colour Temperature Across Whatever You Choose
The NLF-0410 neon flex is available in warm white (3000K) and neutral white (4000K), and the strip run inside the NLP-1512 profile can be matched to either. The LED wardrobe light runs at 4000K. Specify the same tone across whichever components a project uses, and the light reads as one consistent colour rather than several different whites.
🧩
Buy What You Need
Every option is complete on its own — no requirement to buy the other three to make one work.
⚡
One Common Voltage
All four run on 12–24V DC, so whichever combination a project picks, the wiring lines up.
🔌
Easy Connection When You Want It
The 12-port power supply is there if you'd rather run everything off one driver instead of several.
👋
Auto On/Off, Nothing to Wire
The sensor wardrobe light's IR trigger and touch control are built in — no separate switch to source.
🎨
Matched Colour Temperature
3000K or 4000K options, so whichever pieces are used together read as one consistent white.
📏
A Fixture for Every Look
Defined line, indirect glow, or a compact sensor bar — the visual result differs by design, not accident.
🛡️
SELV Safety Where It Matters
The power supply's 12–24V output is safe for furniture that's opened and touched every day.
🇮🇳
Supplied Pan-India
Any single item or any combination, sourced from one supplier — including project quantities.
Do I have to buy all four of these to light a wardrobe, or can I pick just one?
You can pick just one. Each of the four is a complete solution to a specific problem — a clean light line, indirect wardrobe lighting, easy power connection, or an auto on/off surface light — and works perfectly well on its own. Most projects only need one or two; the full set exists so each part is there if the project calls for it.
How do I decide between the NLF-0410 neon flex and the NLP-1512 profile?
Choose by the look you want. The NLF-0410 is a self-contained 4×10mm neon flex that sits flush and reads as one clean, unbroken line — the pick when the light itself should be the visible detail. The NLP-1512 is an aluminium channel with a silicone diffuser that houses a strip and softens it into indirect, ambient wardrobe lighting, bending around curves where needed — the pick when you want glow rather than a defined line.
Does the LED wardrobe light need a separate IR sensor and switch?
No — the sensor is built in. The surface-mount LED wardrobe light has an inbuilt IR sensor plus touch control, so it switches on automatically as the door opens and off again after a short delay, or can be operated by touch instead. There's no separate sensor module or switch to wire in.
How many LED wardrobe lights can be joined together, and how do they connect to power?
Up to 10 pieces can be linked side by side to light a full run of shelving. For power, the 12-port cabinet power supply is the easy-connection option — each linked run, or each separate fixture, wires to its own port on a single driver instead of a separate transformer per light.
What are the specifications of the LED wardrobe light with the built-in sensor?
It runs on 12V DC, draws 3–10W depending on fitting length, and is available in 4000K neutral white. Control is by inbuilt IR sensor (auto on/off) or touch, the sensor range is approximately 10cm, and up to 10 units can be linked together along a run.
Is this compatible with the 12-port cabinet power supply?
Yes. The LED wardrobe light runs on 12V DC, the NLF-0410 neon flex and NLP-1512 profile strips run on 12–24V, and the cabinet power supply outputs 12–24V DC across 12 independent ports — so any combination of these four can be wired back to the same driver without a voltage mismatch.
Does Nucleo supply and help specify wardrobe lighting for carpentry and interior projects across India?
Yes. Nucleo supplies neon flex, aluminium profiles, cabinet power supplies and sensor wardrobe lights pan-India to interior contractors, modular furniture fabricators and carpentry workshops in Mumbai, Delhi, Bangalore, Hyderabad, Chennai, Pune and other cities, and can help decide which combination suits a given project.
