24V LED Neon Flex Rope Light: a clean line of light, 20 metres long
A silicone-bodied, IP65 rated neon flex that draws a smooth, continuous glow along edges, outlines and railings. Low voltage 24V, supplied in a single 20 metre length.
Light that reads as a line, not a row of dots
Most architectural lighting is meant to be hidden. Neon flex is the opposite: the light source is the feature. Its silicone body diffuses the LEDs into one continuous, even tube of colour that holds its shape around corners and curves.
This 24V rope light is built for that job. The sealed silicone sheath carries an IP65 rating, so it can sit outdoors on facades, balcony rails and garden edges, and the single 20 metre piece covers a long outline without a chain of joints.
Use it where the outline itself is the message: a building edge at night, a signboard border, a staircase edge or a festive frame.
What you get in the box
The facts we have confirmed for this product. For wattage, colour options and driver matching, speak to our team.
24V DC
Low voltage operation on a 24V constant voltage driver.
IP65 rated
Dust tight and protected against water jets.
20 metre length
One long piece for continuous outline runs.
Silicone body
Flexible, weather resistant sheath, decorative use.
Plan the feed point first
On a 20 metre run, decide where the driver and power feed sit before fixing anything. Feeding from a well-placed point keeps the cabling short and the glow even from end to end.
Built for clean, reliable outlines
Continuous diffused glow
The silicone body blends the light into one smooth line with no visible hot spots from a normal viewing distance.
Weather ready for outdoors
IP65 protection lets it work on exterior edges, rails and garden features exposed to rain and dust.
Flexible around corners
The soft silicone follows gentle curves and turns, so one run can trace a whole outline.
Safer low voltage
24V DC operation keeps the lit line at low voltage, with mains kept at the driver.
Long single piece
Twenty metres in one length reduces joints along the run, which means fewer weak points to seal.
Single colour clarity
A single colour line gives a bold, clean accent that reads clearly from a distance.
Easy to fix and clip
Standard clips and channels hold it straight along walls, frames and edges.
Dimmer friendly
Pairs with a 24V PWM dimmer or dimmable driver to set the mood, subject to the driver chosen.
Draw the shape of the building in one unbroken line
When the daylight goes, a single, even line of neon flex does the work of an entire facade design: it defines height, edges and entrances without adding visual clutter.
Where this neon flex works hard
Facade outlines
Trace rooflines, parapets and window edges on commercial and residential buildings.
Balcony & stair railings
Mark handrails and edges for safer, more welcoming movement after dark.
Signage borders
Frame shop signs, boards and logos with a bold line of light.
Garden & landscape edges
Define paths, planters and boundaries with weather resistant light.
Festive decoration
Weddings, Diwali and event stages need long, bright outlines that go up quickly.
Restaurants & cafés
Accent lines along canopies, bar fronts and entrances.
Showrooms & retail
Highlight display edges and shopfront perimeters to draw attention.
Pool & terrace surrounds
Outline decks, steps and seating areas, keeping connectors and driver in dry areas.
Event & stage design
Shape arches, backdrops and walkways with a flexible light line.
Keep joins and drivers dry
IP65 protects the neon flex body. Connectors, end caps and the 24V driver still need a dry, ventilated, covered location, especially on outdoor runs.
Installation and specification questions
It runs on 24V DC, so it needs a 24V constant voltage LED driver sized to the total load of the run. It does not connect to mains directly.
IP65 means the body is dust tight and protected against water jets, which covers rain and splashes on facades, railings and gardens. It is not meant for continuous submersion, and connectors and driver joins still need to be kept dry.
The product is supplied as a 20 metre length. Plan the driver location and any feed points before installation so the run reaches without joints where possible.
Choose a 24V constant voltage driver with a rating comfortably above the total wattage of the neon flex, and place it in a dry, ventilated enclosure. Share the length and colour with our team and we will help match the driver.
Use mounting clips or a channel at regular intervals and avoid pulling the flex tight. Keep bends gentle and avoid sharp kinks, which can crease the silicone body and show as a dark spot in the glow.
It is a decorative light. It draws a visible, even line of colour for outlines, edges and accents rather than lighting a surface for reading or work.
A single colour 24V load can generally be dimmed with a compatible 24V PWM dimmer or a dimmable driver. Confirm the pairing before ordering.
Planning an outline or decorative project?
Tell us your run length, colour and location. We will help you match the right driver and accessories.
