Radiused cove body
A 60mm x 36.3mm curved section bridges wall and ceiling instead of hiding in a sharp corner.
Nucleo · Aluminium Profiles
Let the ceiling edge curve into light
The NLP-HG6 is a radiused aluminium cove profile. It replaces the hard corner where wall meets ceiling with one smooth arc and a soft, graduated indirect wash.
Why a curve
A junction that reads as one surface
Most cove channels sit inside a right angle. The light changes direction, but the geometry around it does not, so a visible fitting remains in the corner. The NLP-HG6 changes the geometry. Its body is a true radius, 60mm x 36.3mm, that connects the wall plane to the ceiling plane in one gesture.
Because the light leaves across an arc rather than from a single edge, brightness fades gradually. There is no hot line on the ceiling and no hard shadow below. The profile ships with a matching diffuser and is available in black, white and gold.
Heavy extrusion keeps the arc true
A curved profile shows any twist or sag more than a straight one does. At 674g per metre, the NLP-HG6 is a dense extrusion that holds its radius along long runs, so the curve stays even from one end of the room to the other.
Features
Built for soft indirect light
9.6mm diffusion channel
An internal channel sized to spread light across the arc and avoid a single bright edge.
Diffuser included
Each pack carries 10 pieces of profile and 10 matching diffusers shaped to follow the curve.
674g/m aluminium
Enough mass to resist flexing during fixing, which keeps long runs visually continuous.
Black, white or gold
Black and white recede into the surface. Gold is chosen when the curve is meant to be seen.
Cut and join on site
Trim lengths to fit the room and connect them for a continuous perimeter cove.
Gold is a design decision
Where the profile will stay visible, such as a hotel reception or a feature wall junction, the gold finish turns the curve into a deliberate metal line rather than something to conceal. Choose black or white when the aim is to disappear into the wall colour.
Applications
Where the curve belongs
Living rooms
Ceiling perimeter coves with no hard shadow line.
Hotel lobbies
Gold curves over reception and feature walls.
Boardrooms
Glare-free ambient light for meeting rooms.
Showrooms
Curved junctions that draw the eye without a visible fitting.
Restaurants and bars
Ambient glow along booths and perimeter walls.
Spas and wellness
A calm, shadow-free wash for relaxation areas.
Stairs and landings
Soft soffit coves that ease level changes.
Galleries
Even wall-to-ceiling light where the fitting must stay unseen.
FAQ
Installation and specification questions
A corner cove profile sits inside the angle between two flat planes. The NLP-HG6 has a radiused 60mm x 36.3mm body that creates a smooth transition between wall and ceiling, so light spreads across an arc instead of from one edge.
Yes. Every pack contains 10 pieces of profile and 10 pieces of matching diffuser, so nothing needs to be sourced separately.
Black, white and gold. Black and white blend into the architecture, while gold suits projects where the exposed curve is part of the design.
A curved section has to keep its radius over the full length. The extra mass resists twisting and flexing during installation, which keeps the arc and the light gradient even.
Yes. Trim the aluminium to the room dimension and join lengths for a continuous perimeter run. Check corner and joint details with us before ordering for complex layouts.
The profile and diffuser are supplied as a set. LED strip and power supply are selected separately according to the length and brightness you need. Our team can help match them.
Fix it at the wall-ceiling junction on a clean, straight substrate. Mark a level line first so the curve follows the room edge without drifting.
