One Fitting, Two Bands of Light
Most wall accent lighting has to pick a side — a profile either grazes upward or washes downward, and if a designer wants both, the usual answer is two separate channels mounted apart, each wired and aligned on its own. The NLP-5015 removes that trade-off. One aluminium body, one LED strip, one mounting line — and light reaches the wall in both directions from the same source.
The strip sits fully enclosed inside the extrusion. On either side of the body, a white PC diffuser cover softens the output before it reaches the wall, so what a viewer sees is never the LED, never the fitting — only two clean, symmetrical bands of glow spreading away from a single, quiet line.
Same Strip, Split Two Ways
Inside the NLP-5015, one LED strip supplies two separate emission openings built into the extrusion — one directed up, one directed down. Because both openings draw from the same source, the two bands stay perfectly matched in colour and brightness, and there is no second channel to plan, mount, or align separately.
Finish Options
White Powder Coat
Body finished in matte white · white PC diffuser on both openings
Black Powder Coat
Body finished in matte black · white PC diffuser on both openings
What Makes the Effect Work
The Fitting Disappears
Powder-coated body and diffusers keep the hardware visually quiet — the eye reads glow on the wall, not a light fixture mounted to it.
Matched Up + Down Bands
Both directions are fed by the same strip, so brightness and colour temperature stay identical above and below the mounting line.
Diffused, Not Direct
PC diffuser covers scatter the LED output before it exits the profile — no visible chip lines, no hot spots on the wall surface.
One Line to Plan
A single mounting line replaces the two separate runs a designer would otherwise coordinate to achieve the same bidirectional effect.
Any Orientation
Horizontal for a classic wall band, vertical at a corner or panel edge — the bidirectional principle holds in either orientation.
Strip-Agnostic
Takes warm white, tunable white, or RGBWW strips — the profile is a light-shaping shell, the colour behaviour comes from the strip you choose.
Fixed to the Wall, Not Into It
The NLP-5015 is a surface-fix profile — it screws or clips straight onto a finished wall, with no chasing, no channelling, and no plaster repair. That makes it as workable on a retrofit accent wall as it is on a new build, since it goes up after the wall finish is already done.
Where It Gets Specified
Headboard Walls
A single glowing band centred behind the bed, lighting the wall above and below at once
Hotel Rooms
A repeatable feature-wall detail that reads consistently across every guest room
Living Rooms
Accent line above consoles or media walls without a second fitting to coordinate
Corridors
A continuous horizontal line that doubles as gentle wayfinding illumination
Restaurants & Bars
Soft, symmetrical wall wash that sets an intimate tone without visible fittings
Reception & Boardrooms
A precise architectural line that signals quality without extra hardware on show
Retail Back-Walls
Even, glare-free glow behind shelving and display panels in premium retail fit-outs
Columns & Panel Edges
Mounted vertically, it defines an edge with light spreading into both adjoining planes
Frequently Asked Questions
Specify the NLP-5015 for Your Wall
Talk to us about LED strip selection, run lengths, and mounting for the NLP-5015 Two-Way Wall Profile on your project.
