Your own night sky, installed in a weekend
One box holds the light engine, the remote and every pre-cut fiber. Choose 200 points for a clean, even field or 300 mixed-diameter points for real depth.
A star ceiling without the sourcing headache
Most star ceiling projects stall at the parts list: how many fibers, which diameters, what engine, what length. Nucleo kits settle those questions up front. The engine is matched to the fiber count, the fibers are cut to length, and the remote is paired. What is left is layout and drilling.
The principle is simple. The engine produces light, the fibers carry it to the ceiling surface, and each fiber end glows as a single point. No current passes through the fibers, so the ceiling itself stays cool and electrically inert.
Why mixed diameters look more real
In a real sky, stars differ in brightness. A uniform ceiling reads as a pattern of dots; a ceiling with 0.75 mm, 1 mm and 1.5 mm points reads as depth. That is the reason the 300-point kit pairs three diameters instead of one.
Choose your kit
Both kits ship with an 18W RGBW twinkling engine, RF remote, power cable and installation guide.
Uniform Point Kit
All fibers share one diameter, giving a calm, even field that suits bedrooms, nurseries and minimal interiors.
200 × 1.00 mm3 m each- 200 PMMA fibers, pre-cut
- 18W RGBW twinkling engine
- RF remote and power cable
- Installation guide
Mixed Diameter Kit
Faint distant points and brighter near ones. The closest match to a natural sky, well suited to home theatres and lounges.
180 × 0.75 mm90 × 1.00 mm30 × 1.50 mm3 m each- 300 PMMA fibers, pre-cut
- 18W RGBW twinkling engine
- RF remote and power cable
- Installation guide
Add shooting stars
Specify the motorised effect engine when ordering and the field twinkles at random, with optional bright streaks crossing the ceiling at intervals. No separate controller or programming. It is available on both kits and on custom builds.
What you get from the kit
RGBW colour control
Warm white for a quiet evening, deep blue for a film, or a slow colour cycle for a party, all from the RF remote.
Natural twinkle
Points brighten and fade at different rates, avoiding the static look of fixed dots.
Cool, current-free ceiling
Only light travels through the fiber. No heat or electricity at the surface above the room.
Matched components
Engine output and fiber count are balanced at the factory, so no guesswork about brightness.
RF remote
Works without line of sight, so you can control it from the sofa or the bed.
Custom builds
Point count from 100 to 2000+, fiber length from 1 m to 12 m, and any mix from 0.75 mm to 3 mm.
Installation in five stages
Where star ceilings work best
Master bedrooms
A low, soft field for winding down.
Home theatres
A dark ceiling that stays quiet during films.
Children's rooms
A cool, current-free night sky.
Living lounges
A feature panel above a seating zone.
Boutique hotel suites
A memorable guest-room detail.
Spas and wellness rooms
Slow colour for a calming mood.
Lounges and bars
Ambient ceiling interest at low light.
Prayer and meditation rooms
Gentle, still points of light.
Frequently asked questions
An 18W RGBW twinkling light engine, RF remote, power cable, installation guide and pre-cut 3 m PMMA fibers: 200 × 1 mm in the 200-point kit, or 180 × 0.75 mm, 90 × 1 mm and 30 × 1.5 mm in the 300-point kit.
It depends on the star density you want. As a guide, 200 points suit a bedroom or small lounge and 300 mixed points suit a larger room or home theatre. Bigger ceilings call for a custom kit with more points and a higher-output engine.
You need a surface that can take small drilled holes with a void behind it for the fiber tails and engine. Gypsum or POP false ceilings are typical. On a bare slab, fix a lightweight board below it.
Yes. Mark the layout, drill, thread the fibers, trim them flush and gather the tails into the engine. Basic hand tools and a ladder are enough, and the engine needs only a power point.
Fibers carry light only, with no current and no heat at the ceiling. Keep the engine in the void or a ventilated enclosure, out of reach.
It adds a motorised effect so points twinkle at random and, if specified, bright streaks cross the field at intervals. No additional controller is needed. State it when ordering.
In the ceiling void or a nearby cupboard with airflow and service access. Keep fiber tails short enough to reach the port without sharp bends, and avoid sealed, hot spaces.
Yes. Custom kits vary point count, fiber length, diameter mix from 0.75 mm to 3 mm and the engine configuration. Send the ceiling dimensions to Nucleo for a recommendation.
Tell us your ceiling size
We will recommend the right kit or build a custom one.
