The Spotlight That Survives a Layout Change
Fixed downlights are positioned on drawings and then live with those decisions for years. A shelf moves, a painting is rehung, a display table shifts two metres, and the pool of light is suddenly landing on bare floor.
Novatilt separates where the fixture is mounted from where the light goes. The base is fixed to the surface once. The head then rotates through a full circle and tilts, so the beam can be pointed at whatever matters today and re-pointed tomorrow without touching the wiring.
Because it mounts on the surface, it also works where recessed lights cannot: bare RCC slabs, plastered soffits, timber ceilings and walls with no void behind them.
Aiming in Three Moves
Fix the base
Screw the base to the ceiling or wall at the supply point. Cable exits behind the plate.
Rotate the head
Swing the head around the full circle until it faces the target side of the room.
Tilt to the target
Lower or raise the head until the pool of light sits on the product, picture or wall.
One Source, One Clean Pool of Light
COB stands for chip-on-board. Many tiny LED chips share one emitting surface, so the fixture behaves as a single continuous source rather than a cluster of dots. On a white wall or a glossy package this shows up as an evenly filled beam with a clean edge, instead of rings, speckle or a patchy rim.
Built for Ceilings Nobody Wants to Cut
Recessed fittings need a false ceiling, a void and a cutout. Novatilt needs only a flat surface and a power point. That makes it the practical option for exposed concrete, heritage buildings, retrofit shops and rented units where the ceiling cannot be altered. Plan the conduit run before finishing so the cable disappears behind the base plate.
Why Specifiers Choose Novatilt
Full-Circle Rotation
The head turns through 360° on the base, so one mounting point can serve every direction in the room.
Tilting Head
Raise or lower the beam from near-vertical to a raking angle for grazing walls or lighting a display from the side.
COB Light Quality
A continuous emitting area gives a smooth, dot-free beam suited to retail and gallery work.
No Cutout Needed
Fixes directly to concrete, plaster or timber. No false ceiling, no recess, no ceiling void.
Holds Its Aim
Once positioned, the head stays where it is set. Re-aiming is a deliberate adjustment, not drift.
Ceiling or Wall
The same base mounts on either surface, which suits niches, landings and corridor walls.
Where Novatilt Earns Its Place
Boutiques & Retail
Re-aim at new stock without calling an electrician.
Galleries
Dial in the beam on each frame as exhibitions change.
Hotel Lobbies
Pick out reception desks, sculpture and feature walls.
Restaurants & Cafés
Spot tables and counters where false ceilings are not an option.
Living Rooms
Accent a bookshelf, art wall or reading corner.
Open Offices
Highlight reception and meeting zones under exposed slabs.
Staircase Landings
Wall-mount to wash a stair wall or light the tread.
Heritage Retrofits
Add light without cutting into historic ceilings.
Pop-up Stores
Rented shells where the ceiling must stay untouched.
Installation and Specification Questions
Light the Right Spot, Every Time
Talk to Nucleo about Novatilt options, quantities and samples for your project.
